Call 08046031224 87% Response Rate

Send Email

Industrial Tape

We are a leading Wholesale Trader of industrial brake liner, ptfe teflon tape, teflon tape, ptfe flex o seal, spiral wound gaskets and asbestos webbing tape from Mumbai, India.

Industrial Brake Liner

Industrial Brake Liner
  • Industrial Brake Liner
  • Industrial Brake Liner
  • Industrial Brake Liner
Get Best Quote
Product Price: Rs 500 / MeterGet Best Price

Product Details:
MaterialRubber
Min tensile strength180 Kg/cm-square
Max tensile strength200 Kg/cm-square
Min compressive strength630 Kg/cm-square
Max compressive strength650 Kg/cm-square
Recommended maximum temperature260 degree centigrade
Maximum continuous temperature125 degree centigrade
These Industrial brake roll liners are heat resistant materials with high coefficient of friction and are very cost effective as compared to other shock absorbers The performance parameters and the other specifications of Brake Liner are mentioned below.

Other Details:
  • The tensile strength of the liners are 180-200 Kg/cm-square, compressive strength is 630-650 Kg/cm-square, rivet holding capacity is 885-925 Kg/cm-square.
  • Recommended maximum temperature is 260 degree centigrade and maximum continuous temperature is 125 degree centigrade.
  • Recommended mating surface is good quality close grain or alloy cast iron.
Yes! I am InterestedRequest A Callback

Industrial Brake Liner

Industrial Brake Liner
  • Industrial Brake Liner
  • Industrial Brake Liner
  • Industrial Brake Liner
Get Best Quote
Product Price: Rs 800 / MeterGet Best Price

Product Details:
MaterialRubber
Min tensile strength180 Kg/cm-square
Max tensile strength200 Kg/cm-square
Min compressive strength630 Kg/cm-square
Max compressive strength650 Kg/cm-square
Maximum continuous temperature125 degree centigrade
Recommended maximum temperature260 degree centigrade
[Sell]We are the leading manufacturers of brake shoe liners and have been catering to the clients need for past many years. These Industrial brake roll liners are heat resistant materials with high coefficient of friction and are very cost effective as compared to other shock absorbers The performance parameters and the other specifications of Industrial Brake Roll Liner are mentioned below.

Other Details: The tensile strength of the liners are 180-200Kg/cm-square, compressive strength is 630-650Kg/cm-square, rivet holding capacity is 885-925Kg/cm-square. Recommended maximum temperature is 260 degree centigrade and maximum continuous temperature is 125 degree centigrade. Recommended mating surface is good quality close grain or alloy cast iron.
Yes! I am InterestedRequest A Callback

Ptfe Teflon Tape

Ptfe Teflon Tape
  • Ptfe Teflon Tape
  • Ptfe Teflon Tape
  • Ptfe Teflon Tape
Get Best Quote
Product Price: Rs 17 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Product Details:
Tape Width0-20 mm
Backing MaterialTEFLON TAPE 12MM
ColorWHITE
BrandKOHINOOR MAKE
Tape TypeNon-Adhesive
Total Thickness0.075MM
KOHINOOR MAKE                            

Additional Information:

  • Delivery Time: READY
  • Packaging Details: BOX
Yes! I am InterestedRequest A Callback

Teflon Tape

Teflon Tape
  • Teflon Tape
  • Teflon Tape
  • Teflon Tape
Get Best Quote
Product Price: Rs 21 / PieceGet Best Price

Product Details:
MaterialPTFE
TypeSingle Sided
BrandChampion
ColorBlue
Packing TypeCarton Box
Min Temperature-240 deg C

Champion PTFE Theade Seal Tape, due to the special nature of the thread seal will be lasting and resistant to high temperatures and corrosive chemicals. The seal will not harden or become brittle but will remain flexible enough when the seal is opened for maintenance.

 

"Champion" PTFE Thread Sealant Tape can be used for various media from corrosive chemicals to water and gas to oil, in hydraulics and pneumatics.

Yes! I am InterestedRequest A Callback

PTFE Flex O Seal

PTFE Flex O Seal
  • PTFE Flex O Seal
  • PTFE Flex O Seal
  • PTFE Flex O Seal
Get Best Quote
Product Price: Rs 850 / PieceGet Best Price

Product Details:
Diameter20 mm
MaterialPTFE
ColorOff White
Packaging TypeBundles
Min Temperature-240 deg C
Max Temperature310 deg C
pH Range0 to 14
FLEX-O-SEAL can withstand a wide range of temperature as is recommended or use from -240oC to 310oC and pH Range 0 to 14. This product is resistant to high pressure and is non-toxic as well as Asbestos FREE however it is not recommended for use against elemental fluorine, alkali metal sand strong oxidizing agents,


Application:

Flex-O-Seal is safely used in application on oil rigs, petroleum refineries, offshore operations, corrosive chemical processing, food processing, paper mill, marine installation, in glass lined or fiber glass reinforced vessels and tank lid sealing, heat exchangers, manhole covers, vent pipes, pumps or compressors housing flanges, valves and many other industrial applications where the use of a conventional pre-cut gaskets is not suitable or readily available.


Installation:

  • At the time of installation the sealing surface must be clean, free from grease and dry to enable the gasket to stick properly
  • The width of the joint gasket is to be determined by the nominal diameter type of flange.
  • Selection of a tentative size of joint gasket would be approx, 1/3rd flange contact width inside the bolt hole, example: 7 mm gasket joint to suit a 20 mm flange width
  • Remove the protective foil from the adhesive joint gasket to allow for fitting
  • Stick the gasket about 2 mm away from the bolt hole and press lightly
  • Do not butt the ends, instead overlap them in front of a bolt
  • Tighten the lubricated bolts in opposite pairs. The lap joint deforms perfectly to give a reliable seal
  • On irregular of damaged flanged surfaces, it is possible to build up with short length of Flex-O-Seal
Yes! I am InterestedRequest A Callback

Spiral Wound Gaskets

Spiral Wound Gaskets
  • Spiral Wound Gaskets
  • Spiral Wound Gaskets
  • Spiral Wound Gaskets
  • Spiral Wound Gaskets
Get Best Quote
Product Price: Rs 50 / PieceGet Best Price

Product Details:
Purity99.8%
Max Working Temperature1200 deg C
Non Asbestos Temperature550 deg C
PTFE Temperature250 deg C
Ceramic Temperature1000 deg C
MaterialStainless Steel
Filler MaterialsGraphite
Spiral wound gaskets have proven to be the most reliable sealing element for use in difficult, critical and arduous duties. Spiral wound gaskets are used in Refinery, Petrochemical, Chemical, Steam lines and Process Industries, where they have many advantages over older types of gaskets.

Typical Applications:
  • Pipe, valve, pump, thermal exchange, condensing tower, plain hole and man hole of flange, etc.
  • Petrochemical, chemical, mechanical manufacturer, power station, metallurgy, shipbuilding, medical and pharmaceutical unclear power station and navigation, etc.

Prime Features:
  • Gasket are made in a wide variety of sizes and shapes.
  • Combinations of metal strip and filler are selected to suit the specific fluid media and operating conditions.
  • Quick to install and remove
  • Make gaskets suitable for high pipeline pressure on flat or raised flange faces.
  • Temperatures from cryogenic up to 1000 °C

Spiral Wound Gaskets Package Types:
  • Between 1/2' ~ 24' gaskets are packaged by plastic clips each 10 pcs.
  • Upto 24' gaskets packaged by soft cotton tape each.
  • To ensure that clients receive the highest quality of spiral wound gaskets.

Yes! I am InterestedRequest A Callback

Asbestos Webbing Tape

Asbestos Webbing Tape
  • Asbestos Webbing Tape
  • Asbestos Webbing Tape
  • Asbestos Webbing Tape
Get Best Quote
Product Price: Rs 240 / KgGet Best Price

Product Details:
MaterialAsbestos
Min Width12.5 mm
Max Width150 mm
Min Thickness1.5 mm
Max Thickness6 mm
Length60 m
Temperature300 deg C
Asbestos Webbing Tape are used for wrapping of exhaust pipes, hot and cold insulation, electric cables, living switch boxes, drying oven, conveying hot articles in glass Industries, oil lamps and heater.

Yes! I am InterestedRequest A Callback

Champion ST 3 Ultraflon PTFE Packing

Champion ST 3 Ultraflon PTFE Packing
  • Champion ST 3 Ultraflon PTFE Packing
  • Champion ST 3 Ultraflon PTFE Packing
Get Best Quote
Product Price: Rs 4,298 / KgGet Best Price

Product Details:
ColorOff White
MaterialPTFE
Min Length5 m
Min Diameter1.5 mm
Max Diameter19 mm
Length Range5 to 10 mtrs
The packing is manufactured from Pure PTFE yarn impregnated with PTFE dispersion by a special process.The packing has dimensional stability, high compressibility and low coefficient of friction.
Yes! I am InterestedRequest A Callback

Fiberglass Tapes

Fiberglass Tapes
  • Fiberglass Tapes
  • Fiberglass Tapes
Get Best Quote
Product Price: Rs 350 / PieceGet Best Price

Product Details:
ColorOff White
Tape Length20-30 m
MaterialFiberglass
Standard width25 mm, 51 mm, 75 mm, 100 mm
Standard thickness1.5 mm, 2 mm, 3 mm, 5 mm
Packing25 meter rolls
Our organization is considered as one of the prominent names in the industry, we are instrumental in providing an excellent quality gamut of Fiberglass Tapes. Offered products are made available in varied sizes and thickness as per the requirements of our esteemed customers. We deliver the complete range of these products at customers’ end within the predetermined time period. Our patrons can avail these products at market leading rates.

Features:

  • Longer working life
  • Best quality
  • Affordable

Is the glass fiber tape, GFT 1 is used for the thermal and corrosion protection of tubes, flanges, steam lines, valves, weld joints etc. Glass fiber tape can be reinforced with 'SS' wire.


Yes! I am InterestedRequest A Callback

Ceramic Tape

Ceramic Tape
  • Ceramic Tape
  • Ceramic Tape
  • Ceramic Tape
Get Best Quote
Product Price: Rs 350 / KgGet Best Price

Product Details:
Size>4 inch
UsagePackaging, Binding, Sealing
TypeSingle Sided, Double Sided
ColorOff White
Min Thickness2 mm
Max Thickness5 mm
We are a trustyworthy organization offering a wide a gamut of Ceramic Tape.
  • Size: Customized
Yes! I am InterestedRequest A Callback

EXPLORE MORE CATEGORIES

© P. P. International. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.